UsedSpecifications
ManufacturerPerry
Year1982
ConditionUsed
Capacity2,823 gallons
Pressure Rating50 PSI
LocationWaxahachie, TX, United States
Stock #GE4S-1430
Description
Vertical process tank manufactured by Perry in 1982, constructed from T316 stainless steel. This ASME Code N certified vessel (Document 2823) offers 2,823-gallon capacity with a 50 PSI pressure rating. Dimensions are 50" diameter × 10'5-5/8" height.
Vertical process tank manufactured by Perry in 1982. Constructed from T316 stainless steel with 2,823-gallon capacity and 50 PSI pressure rating. ASME Code N certified vessel (Document 2823). Dimensions: 50" diameter × 10'5-5/8" height.
Questions buyers ask
What certification or inspection status does it carry?
This vessel is ASME Code N certified with Document 2823. Code N stamp indicates nuclear service fabrication standards, which imposes more stringent material traceability and NDE requirements than Section VIII. Verify whether current inspection is valid or if recertification is required for your jurisdiction and intended service.
What should I inspect before putting it into service?
Inspect all welds for cracking, particularly at nozzle penetrations and the head-to-shell joint where stress concentration is highest. Check internal surfaces for pitting, crevice corrosion, or discoloration that would indicate prior chemical attack on the T316. Verify the nameplate is intact and legible, and have a qualified inspector review whether hydrostatic testing or NDE is required before returning to service under your jurisdiction's rules.
General guidance for this type of equipment. Ask about this specific unit in your inquiry — the seller answers directly.
Inspection, shipping & payment
Inspection
Pre-purchase inspections are welcome during normal business hours by appointment arranged in advance. We can provide complimentary transportation from DFW Airport and back if you would like to send someone to see the equipment in person. We can also walk through the item over a video call for domestic or international buyers. We are on US Central Time.
Shipping and loading
The equipment is located at our yard south of Dallas, Texas. We can assist with shipping arrangements.
Loading is provided at no charge for equipment under 15,000 lb when scheduled in advance. Equipment over 15,000 lb requires a crane, which is arranged and paid for by the buyer.
Payment
Payment in full is required FOB our yard in South Dallas. A verifiable cashier's check is accepted for collection in person. For release to a third-party shipper we require a wire transfer cleared in our account before the equipment leaves the yard.
Terms set by Gas Equipment 4 Sale.