UsedSpecifications
ManufacturerKimray
Model12SGR
ConditionUsed
Pressure Rating4,000 PSIG inlet / 5,500 PSIG design / 10-250 PSIG output
LocationWaxahachie, TX, United States
Stock #GE4S-1135
Description
Used Kimray 12SGR pressure regulator rated for 4,000 PSIG inlet, 5,500 PSIG design pressure, and 10-250 PSIG output. Operating temperature range is 0°F to 200°F. Unit is located in Waxahachie, TX and available for inspection.
Max Inlet Pressure- 4000 PSIG
Max Design Pressure- 5500 PSIG
Output Pressure 10-250 PSIG
Operating Temperature 0 degrees F to 200 Degrees F
Questions buyers ask
What pressure, flow and temperature is it rated for?
This unit is rated for 4,000 PSIG maximum inlet pressure, 5,500 PSIG design pressure, and 10-250 PSIG output pressure. Operating temperature range is 0°F to 200°F. Flow capacity is not specified in the listing; ask the seller for the Cv rating and orifice size to calculate flow at your expected pressure drop.
What should I inspect before putting it into service?
Inspect the diaphragm and seat for tears, hardening, or extrusion damage, as these are the primary wear points. Check all threaded connections and the body for cracks or corrosion, verify the spring is not collapsed or corroded, and confirm the sensing line port is clear. Bench test at your operating conditions to verify it holds setpoint and locks up cleanly without creep or chattering.
General guidance for this type of equipment. Ask about this specific unit in your inquiry — the seller answers directly.
Inspection, shipping & payment
Inspection
Pre-purchase inspections are welcome during normal business hours by appointment arranged in advance. We can provide complimentary transportation from DFW Airport and back if you would like to send someone to see the equipment in person. We can also walk through the item over a video call for domestic or international buyers. We are on US Central Time.
Shipping and loading
The equipment is located at our yard south of Dallas, Texas. We can assist with shipping arrangements.
Loading is provided at no charge for equipment under 15,000 lb when scheduled in advance. Equipment over 15,000 lb requires a crane, which is arranged and paid for by the buyer.
Payment
Payment in full is required FOB our yard in South Dallas. A verifiable cashier's check is accepted for collection in person. For release to a third-party shipper we require a wire transfer cleared in our account before the equipment leaves the yard.
Terms set by Gas Equipment 4 Sale.
