Hydrogen Compressor ( 120 psi to 4500 psi @ 415scfm) H2 Compressor, low hours

This is a 2003 Greenfield C3T210.3-H2 hydrogen compressor with less than 100 hours of testing time. It compresses hydrogen from 120 PSIG suction to 4500 PSIG discharge at 415 SCFM and was originally purchased for a project that never received permits, so it has never been installed or put into service. The unit includes a control/starter panel, engineering drawings, and some service and maintenance parts, and can be sold as-is or fully refurbished through a third-party provider at additional cost. We have control/starter panel for the compressor, engineering drawings and some service / maintenance parts. The C3T compressors are one of the most reliable machines build by Sulzer / Greenfield. With thousands of units in the field supporting different high-pressure gas uses (cng, hydrogen, helium, nitrogen) C3T consider to be strong block / platform. As of today, Greenfield is a part of Atlas Capco group of companies and C3T units are still actively serviced and part supported by Atlas Capco network of technicians. This unit has a 50% turn down ration, meaning you can run it at 50% of its capacity with an ability to crank up the compression as needed. Specifications: Gas: Hydrogen Suction Pressure: 120 PSIG Discharge Pressure: 4500 PSIG Capacity: 415 SCFM HorsePower: 200 HP Speed: 1045 RPM Low Hours Identification Data: Station SN/ Compressor SN: IG340 / 700422 Type of Machine: C3T210.3 Number of cylinders: 6 Number of Stages: 3 Gas and Operating Data: Gas Composition: H2 100% Relative humidity: dry Operating Conditions: Capacity supplied, dry at 70°F and 14.17 psig: 415 SCFM Suction pressure: 120 PSIG Suction temperature: 68ºF Final pressure: 4500 PSIG Shaft power: 195 HP Min. required motor power: 200 HP Compressor RPM: 1045 RPM Tolerance: suction capacity (SCFM) ± 5% specific power (kWh/Nm3) ± 5% We have operating manuals, schematics and maintenance requirements. The unit can be sold in its current condition or fully refurbished and operationally optimized by a third-party provider for additional cost. Please review attached files.

Inspection Pre-purchase inspections are welcome during normal business hours by appointment arranged in advance. We can provide complimentary transportation from DFW Airport and back if you would like to send someone to see the equipment in person. We can also walk through the item over a video call for domestic or international buyers. We are on US Central Time. Shipping and loading The equipment is located at our yard south of Dallas, Texas. We can assist with shipping arrangements. Loading is provided at no charge for equipment under 15,000 lb when scheduled in advance. Equipment over 15,000 lb requires a crane, which is arranged and paid for by the buyer. Payment Payment in full is required FOB our yard in South Dallas. A verifiable cashier's check is accepted for collection in person. For release to a third-party shipper we require a wire transfer cleared in our account before the equipment leaves the yard.