High-Flow Aluminum Gas Filter – 1,000 PSIG | 630 SCFM | 1.5" NPT Connections
NewSpecifications
Description
High-Flow Aluminum Gas Filter – 1,000 PSIG | 630 SCFM | 1.5" NPT Connections
This is a Headline Filter model 385-AHP-AD high-pressure gas filter housing, constructed from anodized aluminum for corrosion resistance in compressed gas service. The unit is rated for 1,000 PSIG maximum working pressure and 630 SCFM at 100 PSIG, with 1-1/2" NPT inlet and outlet connections and a 1,500 cc internal volume. It is new, weighs 11 lbs, and uses a Buna-N O-ring seal.
Technical Specifications
Construction: Anodized Aluminum
Connections: 1-1/2" NPT Inlet/Outlet, 1/4" NPT Drain
Maximum Working Pressure: 1,000 PSIG
Internal Volume: 1,500 cc
Seal Material: Buna-N O-Ring
Total Weight: 11 lbs
Flow Capacity: 630 SCFM @ 100 PSIG
Key Features
- Corrosion-resistant anodized aluminum body for extended service life
- Compact, lightweight design for easy integration into existing piping systems
- Buna-N O-ring ensures secure, leak-free sealing under pressure
- High flow capacity supports large-volume gas applications
- Easy to service and maintain, minimizing downtime
Applications
Perfect for use in CNG filtration systems, compressed air treatment, gas production and processing, pneumatic equipment, and industrial gas distribution systems where a durable, high-flow filter housing is required.
Inspection, shipping & payment
Terms set by Gas Equipment 4 Sale.
Price on Request
Have one like this? Sell it on Metal Mountain →
Seller
Gas Equipment 4 Sale
Waxahachie, TX, United States
Business and location confirmed by Metal Mountain.
Questions buyers ask
What pressure, flow and temperature is it rated for?
This unit is rated for 1,000 PSIG maximum working pressure and 630 SCFM at 100 PSIG. The listing does not specify a temperature rating; ask the seller for the maximum operating temperature range, which will typically be governed by the Buna-N O-ring seal material.
What materials are the wetted parts?
The body is anodized aluminum and the seal is Buna-N O-ring. The listing does not specify materials for internal components, drain valve, or hardware that contact the gas stream; ask the seller for a complete wetted parts list.
What should I inspect before putting it into service?
Since this is new equipment, verify the O-ring is properly seated and undamaged, check all NPT threads for cleanliness and freedom from debris, and confirm no shipping damage to the anodized coating or connections. Pressure test the housing per your facility procedures before introducing process gas, and ensure the unit is installed with adequate support given the 11 lb dry weight plus filter element.
General guidance for this type of equipment. Ask about this specific unit in your inquiry — the seller answers directly.