CNG Gas Dryer - Single Tower Natural Gas Dryers, inlet 150 psi, flow 1600 scfm

Used

Specifications

ManufacturerPneumatic Products Corp.

ModelFA-40

ConditionUsed

Flow Rate1600 scfm

Inlet Pressure150 psi

ConfigurationSingle tower

Voltage115 Volt

Frequency60 Hertz

Phase1 phase

Gas ServiceCompressed Air, Natural Gas

LocationWaxahachie, TX, United States

Stock #GE4S-1061

Description

CNG Gas Dryer - Single Tower Natural Gas Dryers, inlet 150 psi, flow 1600 scfm

Pneumatic Products Corp. Model FA-40 single tower natural gas dryer rated for up to 1600 scfm flow at 150 psi inlet pressure. The unit is configured with Housing PCS 1600 1G32 and operates on 115 Volt, 60 Hertz, single phase power. This is a used dryer currently located south of Dallas, Texas.

Single Tower Natural Gas Dryers

Pneumatic Products Corp., Model # FA-40

Single tower,

Operating pressure

Flow Rate: up to 1600 scfm (Housing PCS 1600 1G32)

Power Requirement: 115 Volt 60 Hertz 1 phase

Inspection, shipping & payment

Inspection Pre-purchase inspections are welcome during normal business hours by appointment arranged in advance. We can provide complimentary transportation from DFW Airport and back if you would like to send someone to see the equipment in person. We can also walk through the item over a video call for domestic or international buyers. We are on US Central Time. Shipping and loading The equipment is located at our yard south of Dallas, Texas. We can assist with shipping arrangements. Loading is provided at no charge for equipment under 15,000 lb when scheduled in advance. Equipment over 15,000 lb requires a crane, which is arranged and paid for by the buyer. Payment Payment in full is required FOB our yard in South Dallas. A verifiable cashier's check is accepted for collection in person. For release to a third-party shipper we require a wire transfer cleared in our account before the equipment leaves the yard.

Terms set by Gas Equipment 4 Sale.

Price on Request

Get Pricing Ask a question →

LocationWaxahachie, TX, United States

Stock #GE4S-1061

Have one like this? Sell it on Metal Mountain →

Seller

Gas Equipment 4 Sale

Waxahachie, TX, United States

Verified

Business and location confirmed by Metal Mountain.

Questions buyers ask

What pressure, flow and temperature is it rated for?

This unit is rated for 150 psi inlet pressure with flow capacity up to 1600 scfm. Temperature rating is not provided in the listing; ask the seller for the operating temperature range and whether any temperature control or conditioning is included.

What gases is it compatible with, and has it been oxygen cleaned?

This dryer is configured for natural gas service. The listing does not indicate oxygen cleaning or compatibility with oxygen or other gases; converting dryers between hydrocarbon and oxygen service typically requires complete rebuilding with compatible materials and cleaning protocols.

What should I inspect before putting it into service?

Inspect the desiccant bed for contamination, moisture capacity, and proper regeneration, as spent or contaminated desiccant is the most common failure point on used dryers. Check all seals, o-rings, and valve seats for wear or degradation, verify the regeneration heater and controls function properly, and pressure test the housing per applicable code. Confirm the regeneration cycle timing and purge flow settings match your application requirements.

General guidance for this type of equipment. Ask about this specific unit in your inquiry — the seller answers directly.

Email this