Air Products / Process Engineering 2,000 Gallon Horizontal Mobile Liquid Nitrogen Tank Trailer w/ Generator

This 1977 Air Products / Process Engineering 2,000 Gallon Horizontal Mobile Liquid Nitrogen Tank Trailer is built for cryogenic transport, oilfield servicing, and industrial nitrogen distribution. The trailer features ASME U-stamped vacuum-jacketed construction rated for 40 PSI @ -320°F, a side-mounted cryogenic pump system, and dual engine configuration with a deck engine showing 6,666 hours and main engine showing 93,267 hours. It includes a Hydroseal 7HC relief valve system and Eaton Fuller 7-speed transmission. Capacity: 2,000 U.S. Gallons (7,570 Liters) Design Pressure (MAWP): 40 PSI @ -320°F (Cryogenic Service) Inner Vessel: Stainless steel, vacuum-jacketed for insulation and reduced boil-off Outer Jacket: Carbon steel, painted and insulated, with weather-resistant finish Construction Code: ASME Section VIII, Division 1, U-Stamped Weight per Gallon of Nitrogen: 6.746 lbs/gal Gas Equivalent: 13.803 SCF/Liter, providing large vapor yield per liquid gallon Design Application: Oil well servicing, industrial cryogenic distribution, and mobile nitrogen transport Conversion Chart (Included on Tank): 500 gallons = ~3,370 lbs LIN = ~49.6 MSCF gas equivalent 1,000 gallons = ~6,740 lbs LIN = ~99.2 MSCF gas equivalent 2,000 gallons (full): ~13,480 lbs LIN = ~198.4 MSCF gas equivalent Fill & Withdrawal: Multiple service connections for filling, liquid withdrawal, and vapor return Venting System: Dedicated relief vent piping with orientation diagrams included on the unit Operational Temperature Range: -320°F service Primary Relief Valve: Hydroseal 7HC (ASME-certified) Capacity Range (N₂ at 70°F): 100 psig: 95,200 SCFH 250 psig: 221,000 SCFH 500 psig: 515,000 SCFH 1,000 psig: 851,000 SCFH 1,600 psig: 1,610,000 SCFH Alternate Relief Valve Options: Anderson Greenwood 81xxx series and Fluid Mechanics 1500 Series available per design specs Discharge Configuration: Relief valves mounted to discharge at safe orientation angles (parallel or 90° discharge piping permitted with restrictions) Compliance: Meets DOT/ASME requirements for cryogenic mobile service Pump System: Side-mounted cryogenic pump (Air Products configuration) Drive Line: Deck Engine Hours: 6,666 Hours Main Engine Hours: 9,326 Hours Transmission: Eaton Fuller Roadranger 7-Speed + Lo/Lo (RT01) with Hi/Lo splitter and deep reduction gearing Loading/Unloading: Pump designed for high-flow oilfield and industrial nitrogen service applications Oil well servicing (pressure purging, fracturing, and nitrogen injection) Industrial nitrogen supply for steel, chemical, or manufacturing operations Food processing and preservation (cryogenic freezing or chilling with LIN) Medical/Pharmaceutical cryogenic distribution (bulk nitrogen delivery) General cryogenic bulk transport and distribution

Inspection Pre-purchase inspections are welcome during normal business hours by appointment arranged in advance. We can provide complimentary transportation from DFW Airport and back if you would like to send someone to see the equipment in person. We can also walk through the item over a video call for domestic or international buyers. We are on US Central Time. Shipping and loading The equipment is located at our yard south of Dallas, Texas. We can assist with shipping arrangements. Loading is provided at no charge for equipment under 15,000 lb when scheduled in advance. Equipment over 15,000 lb requires a crane, which is arranged and paid for by the buyer. Payment Payment in full is required FOB our yard in South Dallas. A verifiable cashier's check is accepted for collection in person. For release to a third-party shipper we require a wire transfer cleared in our account before the equipment leaves the yard.