UsedSpecifications
ManufacturerBaldor Industrial Motor
ModelM4407T-4
ConditionUsed
Capacity200 HP at 1760 RPM
LocationWaxahachie, TX, United States
Stock #GE4S-1190
Description
Baldor M4407T-4 industrial motor rated 200 HP at 1760 RPM, 460 volts three-phase, 60 Hz. Frame size 447T with Class F insulation, 1.15 service factor, and NEMA nominal efficiency of 94.1. Unit draws 228 amps at full load with code H locked rotor designation and continuous duty rating at 40°C ambient.
Motor Specifications:
Frame: 447T
SER: 693C
H.P.: 200 TE
Volts: 460
Amps: 228
R.P.M: 1760
Hz: 60
Class: F
R.F.: 1.15
Code: H
Nema Nom EFB: 94.1
Rating: 406 AMB-CONT
Questions buyers ask
What condition is it in, and what service has it seen?
The listing indicates this motor is used, but does not describe its physical condition or document its service history. Ask the seller for runtime hours, prior application details, and whether any maintenance records are available—on motors of this size, bearing replacement history and winding insulation test results are particularly relevant.
What should I inspect before putting it into service?
Perform insulation resistance testing on all three windings to ground and phase-to-phase, inspect bearings for smooth rotation and axial/radial play, and verify shaft runout is within tolerance. Check the frame and mounting feet for cracks or distortion, examine terminal box connections for evidence of overheating, and confirm cooling fan integrity—Class F insulation at 1.15 service factor gives headroom, but prior thermal events may have degraded winding life.
General guidance for this type of equipment. Ask about this specific unit in your inquiry — the seller answers directly.
Inspection, shipping & payment
Inspection
Pre-purchase inspections are welcome during normal business hours by appointment arranged in advance. We can provide complimentary transportation from DFW Airport and back if you would like to send someone to see the equipment in person. We can also walk through the item over a video call for domestic or international buyers. We are on US Central Time.
Shipping and loading
The equipment is located at our yard south of Dallas, Texas. We can assist with shipping arrangements.
Loading is provided at no charge for equipment under 15,000 lb when scheduled in advance. Equipment over 15,000 lb requires a crane, which is arranged and paid for by the buyer.
Payment
Payment in full is required FOB our yard in South Dallas. A verifiable cashier's check is accepted for collection in person. For release to a third-party shipper we require a wire transfer cleared in our account before the equipment leaves the yard.
Terms set by Gas Equipment 4 Sale.