Fiba 33' x 24" — 6,000 PSIG ASME Cryogenic Storage Tank

Is this ASME or DOT rated, and what does that allow me to do with it?

This is an ASME Code vessel, which qualifies it for stationary installation at your facility. ASME construction allows use as fixed storage but does not permit highway transport; DOT certification would be required if you need a portable or truck-mounted configuration.

What is the MAWP and capacity at service pressure?

The maximum allowable working pressure is 6,000 PSIG. The listing does not specify internal volume or gas capacity; request the vessel data report or nameplate details from the seller to calculate storage capacity for your specific gas and operating temperature.

What is the requalification or inspection status?

The listing states this is new condition but does not indicate whether a current hydrostatic test, U-1A form, or initial inspection has been completed. Confirm with the seller whether the original manufacturer's data report and any required witness testing are available, as ASME vessels typically require documentation of initial hydrostatic testing before first use.

What should I inspect before putting it into service?

Verify the nameplate data matches your design conditions, confirm vacuum jacket integrity if this is vacuum-insulated construction, and inspect all nozzles and connections for damage during storage or shipping. For cryogenic service, confirm the metallurgy and construction details on the U-1 form are appropriate for your specific gas and minimum design temperature, as Grade J construction and wall thickness alone don't define low-temperature suitability for all cryogens.